Advice on using Glue Guns

Glue Guns

Glue Guns ( Bostick)

Glue Gun hot melt handy size with trigger for light application. Has retractable stand, safety warning light and fitted plug. Constant thermostatic control.  Uses Bostick handy size hot melt glue sticks.

Glue Sticks handy size.

Strong odourless all purpose adhesive that dries clear.

Bonds plastics, fabric, metal, leather and ceramics.

Glue Gun cool melt

With trigger, safety warning light, retractable stand. Bonds polystyrene, delicate fabrics, rubber and dried flowers.

Advice on using Glue Guns

1. Before use, ALWAYS allow the applicator to warm up to operating temperature.

2. Most applicators are ready in 5-7 minutes.

3. Spray applicators should be allowed to heat up for at least 10 minutes.

4. NEVER lay the applicator on it's side.

5. ALWAYS use the gun stand supplied or an optional stand for suspension hook if available.

7. To AID EASIER START UP the next time the applicator is used, disconnect from the power supply when work is complete and while the tool is cooling extrude about half a cartridge / stick of molten glue through the applicator.

8. NEVER withdraw a part melted glue slug / stick through the back of the gun.

9. NEVER remove the nozzle from a cold applicator as thread damage could result. Remove when warm and always wear protective gloves.

10. ALWAYS wipe any excess molten glue from around the nozzle at the end of each work session. This will avoid build up of glue deposits which can char. This should be done while the applicator is still hot and always wear protective gloves. 

Gluegunsdirect.com